Lidia Curtis TV Stand November 08th, 2018 - 09:25:28
Replacement TV stand the LED strips for TV with the panel number L. C420 D. U es! Fr1 after replacing the LED strips, it is very important to update the firmware in the TV. Removing the panel can be very difficult, as the panel is extremely fragile. If your TV panel is damaged during the replacement process, you will have to get a replacement TV. I will start by removing the back cover.
Remove the t-con board cover disconnect the ribbon cables from the TV panel, disconnect the IR center and key controller cables flip the TV over and remove the bezel. Remove the screws and panel frame gently fold up and tape the scan drive boards to the panel using two sheets of plastic or something similar gets underneath the panel and carefully lift it from the chassis. Remove the light filter frame tape, the corners together on the layers of diffusion and remove them from the chassis flip, the TV over and pinch.
The small clips through that hold the reflector in place remove the reflector using a five in one tool, get underneath the LED strips and remove them from the chassis line up and install the replacement LED strips install the reflector install the reflector clips install the layers of diffusion and remove the tape reinstall the light filter frame install the TV panel remove the tape on the scan, drive boards and get them back into the correct position.
Copyright © 2019 budgetottawa.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Paper holders towel bars sheer lamp shades buffet lamps wooden floor lamps modern wall clock white bathroom vanity solar string lights best soap dispenser toilet seat best rocking chair tablecloth bathroom sinks linen tablecloth outdoor decor armchair.